e-2 eye-beam? glt expanded beam fiber optic connection system eye-beam ? glt expanded beam fber optic termini integrated into ruggedized reverse- bayonet power connectors eye-beam ? glt expanded beam fber optic termini can be integrated into virtually any circular or rectangular connector package. factory terminated lens pin termini and lens socket termini on cable jumpers allow for easy fusion splicing in the feld. ? ? all the benefits of an expanded beam connection system built into a versatile f/o terminus ? ? factory-terminated f/o eye-beam? glt termini easily integrated into any connector package ? ? innovative expanded beam lens terminus expands signal 27x from a standard 9.3 micron fiber core ? ? revolutionary design delivers low db loss (1.5 db multimode, 2.0 db singlemode untuned) performance while reducing maintenance, inspection and test costs ? ? ultra-high precision ceramic sleeves and custom designed terminus bodies ensure axial alignment innovative expanded beam termini deliver optimal performance in harsh environments butt-joint fiber optic terminus eye-beam ? glt expanded beam fiber optic terminus 9.3 micron fber core fiber surfaces exposed and susceptible to damage must be cleaned prior to mating 9.3 micron core expanded 27x fiber surfaces protected from contamination lens surface easy to clean comparison of standard butt-joint fber optic terminus to eye-beam? glt expanded beam fber optic terminus rev. 10.21.16 www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2012 glenair, inc. u.s. cage code 06324 printed in u.s.a. glenair eye-beam? fiber optic system e
e-3 basic part number fa1000 - 50 - 85 a 1 - xxxx a fiber size 09 = 9.3/125 singlemode 50 = 50/125 multimode 62 = 62.5/125 multimode length in inches ex: -0040 = 40 inches (omit for standard 36 inches) end a (see table i) end b (see table ii) operating wavelength 85 = 850nm 13 = 1300/1310nm 15 = 1550nm temperature rating: a = -40c to +85c b = -55c to +125c c = customer specifed* table i: eye-beam ? glt termini designator description connector series a m29504/04 style pin (181-070) mil-dtl-38999 series iii mighty mouse size 16 pin (181-070) series 80 mighty mouse b m29504/05 style socket (181-071) mil-dtl-38999 series iii c m29504/14 style pin (181-095) mil-prf-28876 d m29504/15 style socket (181-096) mil-prf-28876 f mighty mouse size 16 socket (181-083) series 80 mighty mouse g gfr pin (181-082) glenair gfr system h gfr socket (181-081) glenair gfr system j gfoca termini (181-067) gfoca (hermaphroditic) table ii: eye-beam ? glt termini and commercial connectors a m29504/04 style pin (181-070) mighty mouse size 16 pin (181-070) b m29504/05 style socket (181-071) c m29504/14 style pin (181-095) d m29504/15 style socket (181-096) f mighty mouse size 16 socket (181-083) g gfr pin (181-082) h gfr socket (181-081) j gfoca termini (181-067) 1 lc connector 2 lc apc connector 3 fc connector 4 fc apc connector 5 st connector 6 sc connector 7 sma 905 connector 8 sma 906 connector 9 customer specifed* ow to order factory terminated eye-beam ? lt umpers 1. eye-beam? glt system part numbers begin with the fa1000 basic part number 2. select fber size (consult factory for additional options) 3. select operating wavelength 4. select jumper cable confguration. jumpers are supplied standard with 36 inches of fber cable. specifc lengths available in part number breakdown as shown below. eye-beam? glt expanded beam fiber optic connection system standard tolerance for cable jumpers length tolerance 5 in, up to 2 ft +1/-0 in over 2 ft, up to 10 ft +3/-0 in over 10 ft, up to 50 ft +6/-0 in over 50 ft, up to 100 ft +1/-0 ft over 100 ft +2/-0 ft assembly marked with the glenair part number in two places see part number development 4.0 max end a end b 4.0 max notes optical performance: insertion loss to be less than 2.0 db when measured at 1310 nm or 1550 nm wavelength for singlemode, or when measured at 850 nm or 1300 nm for multimode. * for customer-specifc requirements, glenair will assign a unique part number for the cable assembly rev. 10.21.16 www.glenair.com e-mail: sales@glenair.com glenair, inc. ? 1211 air way ? glendale, ca 91201-2497 ? 818-247-6000 ? fax 818-500-9912 ? 2012 glenair, inc. u.s. cage code 06324 printed in u.s.a. glenair eye-beam? fiber optic system e
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: glenair: ? FA1000-62-85B1-0024A? fa1000-62-85f1-0024a
|
